Nova-tech Chem-Tech XP Series User Manual

REV. L PN J63031 - 1- XP Peristaltic Pump Installation, Operation and Maintenance Manual Fixed, Adjustab

REV. L PN J63031 - 10- 3. Depress and hold the Momentary-On (100%) button until the chemical is present in t

REV. L PN J63031 - 11- Figure 7b: Pump Head Assembly with Front Cover Removed 4. Remove the two thumb scr

REV. L PN J63031 - 12- 6.2 Tubing Assembly Installation and Lubrication WARNING: When using the pump to

REV. L PN J63031 - 13- 3. Insert one connector end of the tubing assembly into the bottom retaining slot in

REV. L PN J63031 - 14- 6.3 Pools and Spas Pumps carrying the “ETL Sanitation” (tested to NSF Standard-50) m

REV. L PN J63031 - 15- 7.2 Returns The Customer Service Department will issue a Return Authorization (RA)

REV. L PN J63031 - 16- XP FIXED RATEBLKGROUNDTO MOTOR (GRN)79158162112318417410112132 Appendix 7.4 Pump Asse

REV. L PN J63031 - 17- ITEM NO.PART NUMBER1 J63000 2 J63002 3 J63003 4 J63001 5 J63004 6 J63007

REV. L PN J63031 - 18-

REV. L PN J63031 - 19- WHTBLKBLK

REV. L PN J63031 - 2- TABLE OF CONTENTS 1. Introduction...

REV. L PN J63031 - 20- 7.4 Maintenance Record Date Maintenance Performed

REV. L PN J63031 - 21- 8. PARTS

REV. L PN J63031 - 22- EC Declaration of Conformity We, Pulsafeeder Inc., declare under sole responsi

REV. L PN J63031 - 3- 1. Introduction Thank you for your purchase of the Chem-Tech Series XP peristaltic pum

REV. L PN J63031 - 4- • WARNING: All pumps are factory tested with water. Remove tubing and thoroughly dry i

REV. L PN J63031 - 5- Figure 2: Injector Placement Vertical Mount Horizontal Figure 1: Pump Dimensions 4.

REV. L PN J63031 - 6- 4. Apply pipe tape to the injection fitting threads and install into piping system. D

REV. L PN J63031 - 7- 5. Operation WARNING: Always make sure the voltage on the pump data plate matches the

REV. L PN J63031 - 8- Figure 6: Adjustable Feed-Rate Pump Control Panel (Note Fixed Speed only has 3-Way R

REV. L PN J63031 - 9- 5.3. Pulse Timer Pumps If the pump was purchased with the pulse timer mode the pumps